O&M Plant Technician - O&M Plant Technician Prin.

Job Posting End Date

04-26-2026

Please note the job posting will close on the day before the posting end date

Job Summary

In a safe manner, monitor and inspect all plant equipment including gas/steam turbines, generators, boilers/heat recovery steam generator (HRSGs), transformers, pumps, condensers, switchyard and related auxiliary equipment. Operate local controls and devices for proper plant operation. Perform moderately skilled work in the checking, inspecting, repair, maintenance, installation and construction of plant equipment and structures. Perform moderately technical and skilled work in conjunction with electrical systems, analysis, detection and repair of single loop control systems, electronic devices, communication systems and instruments such as meters, gauges, and regulators. Perform technical work in chemical analyses, industrial hygiene and environmental testing and calculations related to the operating efficiency of power plant equipment. Assist others in conducting tests, surveys and layout work. Communicate and coordinate activities affecting safe and efficient operation of plant in an often distracting and multitasking environment. Demonstrate ability to work with others at all levels.

Job Description

O&M Plant Technician (SP20-05)

What you’ll do:

Essential Job Functions & Tasks

• Demonstrate ethical behavior and show strong leadership in safe and healthy work behaviors and environmental stewardship. Adhere to proper operating practices and procedures designed to prevent injury, illness and environmental noncompliance. Observe governmental and company environmental, safety and health regulations. Demonstrate a strong work ethic, integrity and willingness to work and communicate effectively with all AEP employees and contractors.
• Perform equipment checks to ensure safe and efficient operations during the start-up, operation and shutdown of turbines, generators, condensers, boilers/heat recovery steam generators (HRSGs), boiler feed pumps, exciters, transformers, switchyard and auxiliary equipment. Operate valves, pumps, electrical disconnects, breakers and controls, etc. from remote locations as needed. Take appropriate actions in the event of abnormal plant equipment conditions. Monitor field controlling, indicating and recording devices, compares results with established standards and make adjustments as required based on operating conditions. Enter and review data in the logbook.
• Monitor and respond to alarms and unusual conditions to ensure proper operation of equipment within established standards and reports irregular and abnormal operating conditions to supervision.
• Maintain and monitor basic boiler water chemistry and other plant cycle chemistry by reviewing operational data and collecting and analyzing samples. Maintain and operate the water treatment plant. Analyze data such as chemical test results, conductivity, pH, flow and temperature readings, etc. and make appropriate adjustments. Operate and maintain precision laboratory and field analyzers with QA/QC standards. Gather inventory data on laboratory reagents, chemicals, records information and orders material as needed. Unload deliveries of chemicals and gases per site procedures.
• Assist in monitoring, inspecting, installing, removing, testing, adjusting, calibrating, troubleshooting and repairing electrical, electronic, instrumentation and plant controls systems and components. Conduct simple electrical system interlock and circuit breaker trip checks to determine proper operational performance. Perform simple control system monitoring using a computer interface terminal. Assist in using elementary, schematic, wiring and control diagrams to locate, troubleshoot and repair control systems involving electrical, electronic, mechanical, pneumatic or hydraulic components. Use electrical and instrumentation test equipment to troubleshoot and calibrate plant equipment. Operate, maintain and repair medium and low voltage circuit breakers and associated equipment.
• Operate hoists, fork-lift trucks, small tractors, aerial lifts, scissor lifts, mobile and overhead cranes and automotive equipment and inspects scaffold and rigging in accordance with AEP policies and procedures.
• Perform minor mechanical maintenance work including, dismantling, rebuilding, adjusting, aligning, packing and cleaning equipment. Assist with repair of rotating equipment, valves, actuators, piping, etc. Operate welding machine and gas torch to cut, heat, braze and make tack and temporary welds, etc. Perform minor maintenance work on HVAC and plumbing systems. Properly use machine shop equipment, power and hand tools. Perform rough carpentry work and limited masonry work. Load, unload, move and handle materials, supplies and equipment.
• Perform predictive and preventive maintenance work by inspecting, monitoring, lubricating, troubleshooting and testing plant equipment to determine conditions such as wear, corrosion and deposits. Perform inspections and corrective maintenance activities on plant equipment and components. Conduct chemical tests and inspections to ensure proper oper

What we’re looking for:

Work Experience requirement listed below:

• Must have performed the duties of & maintained all the qualifications, certifications & licenses of Operation & Maintenance Plant Technician Assc, or the equivalent & must pass an examination and/or demonstration as determined by the company Must have a basic knowledge of the heat balance systems and the effect of unbalances on operating efficiency. Must have the ability to direct and coordinate the work of employees and contractors.
• Demonstrate strong oral and written communication skills. Possess the ability to communicate effectively with peers and plant management. Should have 12 to 18 months of power plant experience in operations, maintenance, electrical, instrumentation and controls in gas turbine/HRSG systems. Must have a basic knowledge of applicable operating and maintenance instructions and procedures.
• Understand the care and attention required for the safe and efficient operation and maintenance of the equipment to which assigned. Must have basic knowledge of principles of operating the plant safely & efficiently during start-up, normal operation & shutdown of boilers,HRSGs,turbines,generators,condensers,boiler feed pumps,exciters,transformers & their auxiliaries & accessories. Must have the skills and knowledge of plant operations outside of the control room.
• Must have basic knowledge and skills needed to analyze, interpret, calibrate and adjust plant instruments and controls, and be capable of detecting and making repairs to simple control systems and understand protective systems. Must have basic knowledge of chemical tests, procedures, reagents, etc. to perform chemical analysis, industrial hygiene evaluations and environmental sampling. Must have a basic knowledge of minor plant maintenance, materials, practices, tools, rigging, scaffolding and blocking involved in the work.

The required Pre Employment tests are listed below:

• EEIMASS - Plant Maintenance Sel Sys EEIPOSS - Plant Operator Sel Sys
• Physical demand level is Medium

O&M Plant Technician Sr. (SP20-06)

What you’ll do:

Essential Job Functions & Tasks

• Demonstrate ethical behavior and show strong leadership in safe and healthy work behaviors and environmental stewardship. Adhere to proper operating practices and procedures designed to prevent injury, illness and environmental noncompliance. Observe and comply with governmental and company environmental, safety and health regulations. Demonstrate a strong work ethic, integrity and willingness to work and communicate effectively with all AEP employees and contractors.
• Start-up, operate, control, synchronize and shutdown turbines, generators, condensers, boiler/heat recovery steam generators (HRSGs), boiler feed pumps, exciters, transformers, switchyard and auxiliary equipment safely and efficiently. Operate valves, pumps and controls from the control room and remote locations as needed. Take appropriate actions in the event of abnormal plant equipment conditions and in accordance with plant guidelines for out-of-spec parameters. Monitor controlling, indicating and recording devices, compare results with established standards and make adjustments as required to operating conditions. Instruct others in proper equipment checks to ensure safe and efficient operations of the plant. Enter and review data in the logbook.
• Monitor and respond to alarms and unusual conditions to ensure proper operation of equipment within established standards and report irregular and abnormal operating conditions to supervision.
• Maintain and monitor proper boiler water chemistry and other plant cycle chemistry by reviewing operational data and collecting and analyzing samples. Analyze data such as chemical test results, conductivity, pH, flow and temperature readings, etc. and make appropriate adjustments. Direct others to make appropriate adjustments. Maintain and operate the water treatment plant.
• Communicate with corporate Production Optimization Group (POG) to obtain dispatch orders, confirm status and abnormal conditions. Regulate the unit(s) output in accordance with requirements and plant conditions.
• Monitor, inspect, install, remove, test, adjust, calibrate, troubleshoot and repair electrical, electronic, instrumentation and plant controls systems and components. Conduct electrical system interlock and circuit breaker trip checks to determine proper operational performance. Assist in interlock tests and functional tests on control systems, relays and instrumentation. Perform control system monitoring and program simple modifications using a computer interface terminal. Use elementary, schematics, wiring and controls diagrams to locate, troubleshoot and repair control systems involving electrical, mechanical, pneumatic or hydraulic components. Use electrical and instrumentation test equipment to troubleshoot and calibrate plant equipment.
• Perform mechanical maintenance work including equipment alignment and rebuilds and the use of machine shop and portable machining equipment. Repair rotating equipment, valves, actuators, piping, etc.
• Perform and instruct predictive and preventive maintenance work by inspecting, monitoring, lubricating, and testing plant equipment to determine conditions such as wear, corrosion and deposits. Perform inspections and corrective maintenance activities on plant equipment and components. Conduct chemical tests and inspections to ensure proper operation of the plant. Maintain tools, equipment and work areas in clean and orderly fashion. Assist in developing predictive maintenance schedule and plan activities.
• Use work management systems to initiate, retrieve and update work orders, material requests, PM's and time entry, etc. Use various computer applications and software programs such as DCS, P-GADS, TAPIS, PI, etc. to extract data, analyze trends and report status to ensure plant reliability and efficienc

What we’re looking for:

Work Experience requirement listed below:

• Should have 3 years of power plant experience, of which 2 years should have been experience in operations, maintenance, electrical, instrumentation and controls in gas turbine/HRSG systems. Must have performed the duties of, and maintained all the qualifications, certifications and licenses of Operation and Maintenance Technician, or the equivalent, and must be able to pass an examination and/or demonstration as determined by the company

The required Pre Employment tests are listed below:

• EEIMASS - Plant Maintenance Sel Sys EEIPOSS - Plant Operator Sel Sys PHYPS - Physical Exercises-Plant/Store .

Other preferences:

• Physical demand level is Medium
• Should have 3 years of power plant experience, of which 2 years should have been experience in operations, maintenance, electrical, instrumentation and controls in gas turbine/HRSG systems.
• Must have a working knowledge of the principles of operating the plant safely and efficiently during start-up, normal operation and shutdown of boilers / HRSGs, turbines, generators, condensers, boiler feed pumps, exciters, transformers, etc. and their auxiliaries and accessories. Must have the skills and thorough knowledge of plant operations outside of the control room.
• Must have knowledge and skills needed to analyze, interpret, calibrate and adjust plant instruments and controls, and be capable of readily detecting and making repairs to control systems and understand protective systems.
• Must have a working knowledge of chemical tests, procedures, reagents, etc. to perform chemical analysis, industrial hygiene evaluations and environmental sampling.
• Must have a working knowledge of plant maintenance, materials, practices, tools, rigging, scaffolding and blocking involved in the work.
• Must have a working knowledge of the heat balance systems and the effect of unbalances on operating efficiency.
• Must be able to read, interpret and work from complex prints and specifications.
• Must possess a valid State Stationary Engineer's license where required Successful completion of the Plant Operator Selection System (POSS) and the Plant Maintenance Selection System (MASS) tests are required for this position. A review of Employment Testing Information, Test-Taking Tips, together with the POSS and MASS Practice Tests may be helpful. A link to these materials may be found at AEP.com Careers by selecting Employment testing. A physical abilities assessment is also required for this position.

O&M Plant Technician Prin. (SP20-07)

What you’ll do:

Essential Job Functions & Tasks

• Demonstrate ethical behavior and show strong leadership in safe and healthy work behaviors and environmental stewardship. Adhere to proper operating practices and procedures designed to prevent injury, illness and environmental noncompliance. Observe and comply with governmental and company environmental, safety and health regulations. Demonstrate a strong work ethic, integrity and willingness to work and communicate effectively with all AEP employees and contractors.
• Perform and instruct other personnel to start-up, operate, control, synchronize and shutdown turbines, generators, condensers, boiler/heat recovery steam generators (HRSGs), boiler feed pumps, exciters, transformers, switchyard and auxiliary equipment safely and efficiently. Operate valves, pumps and controls from the control room and remote locations as needed. Take appropriate actions in the event of abnormal plant equipment conditions and in accordance with plant guidelines for out-of-spec parameters. Monitor controlling, indicating and recording devices, compare results with established standards and make adjustments as required to operating conditions. Enter and review data in the logbook.
• Monitor and respond to alarms and unusual conditions to ensure proper operation of equipment within established standards and report irregular and abnormal operating conditions to supervision.
• Maintain and monitor proper boiler water chemistry and other plant cycle chemistry by reviewing operational data and collecting and analyzing samples. Analyze data such as chemical test results, conductivity, pH, flow and temperature readings, etc. and make appropriate adjustments. Direct others to make appropriate adjustments. Maintain and operate the water treatment plant.
• Communicate with corporate Production Optimization Group (POG) to obtain dispatch orders, confirm status and abnormal conditions. Regulate the unit(s) output in accordance with requirements and plant conditions.
• Monitor, inspect, install, remove, test, adjust, calibrate, troubleshoot and repair electrical, electronic, instrumentation and plant controls systems and components. Conduct electrical system interlock and circuit breaker trip checks to determine proper operational performance. Conduct interlock tests and performs functional tests on control systems and instrumentation. Perform control system monitoring and program modifications using a computer interface terminal. Use elementary, schematics, wiring and controls diagrams to locate, troubleshoot and repair control systems involving electrical, mechanical, pneumatic or hydraulic components. Use electrical and instrumentation test equipment to troubleshoot and calibrate plant equipment.
• Perform and instruct others in mechanical maintenance work including equipment alignment and rebuilds, and the use of machine shop and portable machining equipment. Perform and instruct repairs of rotating equipment, valves, actuators, piping, etc.
• Perform and instruct others in predictive and preventive maintenance work by inspecting, monitoring, lubricating, and testing plant equipment to determine conditions such as wear, corrosion and deposits. Perform inspections and corrective maintenance activities on plant equipment and components. Conduct chemical tests and inspections to ensure proper operation of the plant. Maintain tools, equipment and work areas in clean and orderly fashion. Perform predictive maintenance data analyses and make recommendations toward addressing potential equipment liabilities. Assist in developing program requirements for predictive maintenance program.
• Use work management systems to initiate, retrieve, approve, and update work orders, material requests, budget and variance reporting, PM's and time entry, etc. Use various

What we’re looking for:

Education requirements are listed below:

• Must have performed the duties of, and maintained all the qualifications, certifications and licenses of Operation and Maintenance Technician Sr, or the equivalent, Must have a thorough knowledge of plant maintenance, materials, practices, tools, rigging, scaffolding and blocking involved in the work. and must be able to pass an examination and/or demonstration as determined by the company, and in addition: Successful completion of the Plant Operator Selection System (POSS) and the Plant Maintenance Selection System (MASS) tests are required for this position. A review of Employment Testing Information, Test-Taking Tips, together with the POSS and MASS Practice Tests may be helpful. A link to these materials may be found at AEP.com Careers by selecting Employment testing. A physical abilities assessment is also required for this position.

Work Experience requirement listed below:

• Should have 5 years of power plant experience, of which 2 years should have been experience in operations, maintenance, electrical, instrumentation and controls in gas turbine/HRSG systems. Must have a thorough knowledge of operating the plant safely and efficiently during start-up, normal operation and shutdown of boilers / HRSGs, turbines, generators, condensers, boiler feed pumps, exciters, transformers, etc. and their auxiliaries and accessories. Must have the skills and thorough knowledge of plant operations outside of the control room. Must have thorough knowledge and skills needed to analyze, interpret, calibrate and adjust plant instruments and controls, and be capable of readily detecting and making repairs to complex control systems and understand protective systems. Must have a thorough knowledge of chemical tests, procedures, reagents, etc. to perform chemical analysis, industrial hygiene evaluations and environmental sampling. Must have a thorough knowledge of plant maintenance, materials, practices, tools, rigging, scaffolding and blocking involved in the work. Must have a thorough knowledge of the heat balance systems and the effect of unbalances on operating efficiency.

Other preferences:

• Physical demand level is Medium

 In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees.

At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!

Compensation Data

Compensation Grade:

SP20-005

Compensation Range:

$30.53 - $52.67

The Physical Demand Level for this job is: M – Medium Work: Exerting 20 to 50 pounds of force occasionally, and/or 10 to 25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to move objects.   Physical demand requirements are in excess of those for Light Work. 

Hear about it first!   Get job alerts by email.  Log in to your Candidate Home Account today!  If you don't have an account, you can create one.  

It is hereby reaffirmed that it is the policy of American Electric Power (AEP) to provide Equal Employment Opportunity in all respects of the employer-employee relationship including recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company sponsored training programs, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs and termination of employment to all employees and applicants without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, veteran or military status, disability, genetic information, or any other basis prohibited by applicable law. When required by law, we might record certain information or applicants for employment may be invited to voluntarily disclose protected characteristics.