SURFACE MAINTENANCE MECHANIC SUPERVISOR

SURFACE MAINTENANCE MECHANIC SUPERVISOR

Department: Department of the Army

Location(s): Colchester, Vermont

Salary Range: $38.52 - $44.94 Per Hour

Job Summary: THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Surface Maintenance Mechanic Supervisor, Position Description Number D1291000 and is part of Combined Support Maintenance Shop (CSMS) of the Vermont Army National Guard.

Major Duties:

• The purpose of this position is to supervise workers directly or through subordinate leaders and/or supervisors in accomplishing work of the function. Plans work operations of great scope, complexity, and administrative authority. Determines the sequence, priority, and time for performance of operations within the limits of broad work schedules and time limits. DUTIES: (1) Planning: Plans use of subordinate workers, equipment, facilities, and materials on a week-to­ week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Coordinates work with supporting or related work functions controlled by other supervisors. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units. (2) Work Direction: Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities. (3) Administration: Plans and establishes overall leave schedules. Determines training needs of subordinates and arranges for accomplishment. Sets performance standards,and makes formal appraisals of subordinate work performance. Initiates recommendations for promotion or reassignment of subordinates. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized. (4) Performs non-supervisory work, such as transporting equipment, performing maintenance tasks, etc. (5) Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf-life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensures subordinates are trained, qualified, and equipped with proper personnel protective equipment, environmental mediation equipment and materials. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions. **REFER TO PD FOR FULL LIST OF DUTIES/RESPONSIBILITIES**

Qualifications: OPEN AREAS OF CONSIDERATION: AREA 1 Area I: All current On-board Permanent and Indefinite Dual Status 32 and Title 5 (Competitive and Excepted) Technicians (Tenure: 1-Career, 2-Conditional, 3-Indefinite) - Only those Vermont National Guard members who are in permanent or indefinite technician status as a result of being competitively hired within that National Guard component applying for a position within the component which they are currently employed. Military Grades: Enlisted: SFC/E7 through MSG/E8 GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE WS-5801-11: Must have a minimum of 36 months experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, direct, and organize work assignments for lower grade personnel. Experience which required the review of work requirements and establish priorities to meet deadlines. Experience that provided knowledge of various lines of work performed by this function. Experience which demonstrates the ability to supervise or the potential to perform such duties as evidenced by the ability to communicate knowledge of general supervisory concepts, and knowledge of shop processes. Experience in adapting existing equipment and techniques to new situations. Length of time is not of itself qualifying. Candidates' experience should be evaluated based on duties performed rather than strictly on the rank of the individual; however, established compatibility criteria/assignments must be followed. The applicant's record of experience and/or training must show possession of the knowledge, skills and abilities needed to fully perform the duties of the position. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): 1. Ability to provide general instructions, standard procedures, overall priorities and policies. 2. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. 3. Knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment. 4. Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer computerized diagnostic equipment and embedded diagnostics. 5. Knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. 6. Ability to control work operations and accomplish adequate quantity and quality of work. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. OTHER REQUIREMENTS: - This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. - Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. -The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. -For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed. Please be advised: 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicant's RESUME must provide, in detail, how they meet the specialized experience listed. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. 4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts. Do not copy the specialized experience qualifications word for word and place into your resume; you must describe your personal experience as it pertains to each statement.

How to Apply: To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/

Application Deadline: 2025-12-31