Clinical Laboratory Scientist

Clinical Laboratory Scientist

Department: Department of Veterans Affairs

Location(s): Salisbury, North Carolina

Salary Range: $53693 - $103308 Per Year

Job Summary: Clinical Laboratory Scientist (CLS) is a certified laboratoryprofessional who performs complex laboratory diagnostic testing on human specimens for diagnosis, treatment, or prevention of disease in clinical laboratoryspecialties including, but not limited to, Hematology, Chemistry, Immunohematology(Blood Bank), Microbiology, Immunology, and Molecular Diagnostics. A CLS is responsible for performing the pre-analytical, analytical, and post-analytical phases of clinical laboratory testing.

Major Duties:

• Functions: The Clinical Laboratory Scientist (CLS) rotates with other technologists on a regular basis through the above-mentioned areas. S/He also works other assigned shifts: off-hour shifts, weekends, and holidays as priorities demonstrate a need. The duties and responsibilities of the CLS include but are not limited to the following: Duties/Tasks 1. The incumbent works rotating weekends and holidays and provides emergency coverage for other tours as scheduled or as priorities demonstrate a need. 2. May serve as an advanced operator on laboratory analyzers. May perform daily preventative maintenance as well as more intensive weekly, monthly and/or quarterly preventative maintenance. Ensures maintenance is completed as scheduled and within the required timeframes. Appropriately documents all actions related to the maintenance of analyzers. 3. Assists Supervisory Medical Technologist in providing effective and professional training (including on-the-job demonstration) to medical technicians and medical technologists as needed. 4. Evaluates the suitability of the specimen for analysis, requesting new specimen(s) if determined to be unsuitable for testing. Prepares specimens for analysis, ensuring that the physiological state of the specimen properties is maintained. 5. Selects, performs, evaluates, and monitors the performance of test procedures using manual and/or instrumental techniques in accordance with established protocols. Recognizes and reacts to indicators of malfunction; locates and implements corrections. 6. Loads, reagents and consumables as needed to ensure adequate stocking for daily workload. Performs lot-to-lot verification of new lots of reagents according to laboratory policy. 7. Utilizes peer comparison charts for reagents performance verification and patient correlation between multiple instruments and ensures new lot values fall within the acceptable coefficient of variation. 8. Performs and monitors quality controls daily; ensures timely and thorough evaluation of data, ensures discrepancies are identified and resolved, document completion and corrective actions appropriately. Obtains data and complies with the practices, procedures, and techniques described in the quality assurance plan. 9. Utilizes software to generate quality control results for analyzers. Evaluates and interprets quality control by utilizing Levey-Jennings charts and applying Westgard Rules. Appropriately recognizes and addresses statistical process control rule violations associated with, out of control tests. This would include troubleshooting and making judgement calls such as recognizing the need to calibrate and/or perform quality control on reagents. Submits monthly QC data within stated time frames as assigned. 10.Calibrates, standardizes, adjusts, and maintains instruments. Verifies correct instrument operation using established procedures and quality control checks and monitoring. Identifies the cause of common problems and makes simple repairs. 11.Troubleshoots control and/or calibrator problems and works with the manufacturer's hotline technicians to correct repairable problems. Documents corrective action in "corrective action logs". Performs and documents daily, weekly, and monthly maintenance on analyzers. 12.Selects, performs, evaluates, and monitors the performance of non-routine and specialized test procedures using manual and/or instrumental techniques in accordance with established protocols. Recognizes and reacts to indicators of malfunction; locates and implements corrections. Accurately performs all routine, complex and specialized procedures within specified time-period. 13.Performs additional tests to clarify or confirm abnormal patient results. Monitors pending list for delayed or missing samples and follows protocol for reordering tests with appropriate documentation. 14. Recognizes abnormal results that require immediate attention by the physician and reports them directly. Correlates quantitative data with patient data (i.e., history, medications) to verify results. Evaluate guides or implement possible alternative approaches to standard methods. 15.Communicates, consults, and interacts with other members of the healthcare team. Reports critical or urgent test results to the clinician or provider within appropriate timeframes and completes documentation. 16.Works as a technologist to perform all manual and automated tests at the bench level (in the assigned department areas) as outlined in the procedure manuals. 17.Responsible for the performance of laboratory testing using manual and automated testing methods. Enter's the results into laboratory computer system and verify completed results. Work Schedule: 3rd shift (Midnight to 8:00am) rotating shifts, holidays and weekends

Qualifications: BASIC REQUIREMENTS. To qualify for appointment to this position, all applicants must possess the following: Citizenship. Be a citizen of the United States (U.S.). Non-citizens may be appointed when it is not possible to recruit qualified citizens in accordance with 38 U.S.C. § 7407(a). Education. A bachelor's degree or higher from an accredited college or university. Certification. (1) Candidates must meet one of the certification options below. (a) Generalist certification as an MLS given by ASCP BOC or AMT. (b) Generalist certification as an MT given by ASCP BOR or AMT. (c) Categorical certification or Specialist certification by ASCP or AMT. NOTE: Categorical and specialist certifications are not acceptable for CLS Generalist positions or lab sections unrelated to the categorical or specialist certification held. Categorical or specialist certifications are acceptable for higher-graded positions within the relevant lab section or one of the non-section specific assignments (including, Ancillary Testing Coordinator, Education Coordinator, Laboratory Information Manager, Quality Manager, Laboratory Manager, Regional Technical Specialist, National Quality and Compliance Agent, Regional Program Manager, Regional Director, Laboratory Director, or National Quality and Compliance Officer). Loss of Credential. If an employee fails to maintain the required certification, management officials, in collaboration with HR Office staff, must immediately remove the employee from duties and responsibilities associated with this occupation. This may also result in separation from employment. If a CLS currently has, or ever had, their CLS certification revoked, suspended, denied, restricted, limited, or issued/placed in a probationary status, HR Office staff must appoint them according to the provisions in VA Handbook 5005, Part II, Chapter 3, Section B, paragraph 16. Foreign Education. To be creditable, education completed outside the U.S. must be deemed at least equivalent to that gained in a conventional U.S. program by a private organization specializing in the interpretation of foreign educational credentials. Graduates of foreign baccalaureate degree programs meet the educational requirements if they meet either of the following: (1) Foreign transcripts are evaluated by an acceptable evaluation agency, and the degree is found to be equivalent to a NAACLS-approved U.S. clinical laboratory science degree program. OR (2) The applicant submits a letter from ASCP BOC or AMT stating the individual is eligible to take the certification examination. NOTE: Possession of a certification identified in 4c above automatically determines the foreign education as creditable and no further documentation or proof of equivalency is needed. Physical Requirements. See VA Directive and Handbook 5019, Employee Occupational Health Service for requirements. English Language Proficiency. Candidates must be proficient in spoken and written English in accordance with 38 U.S.C. § 7403 (f). GRADE DETERMINATIONS. In addition to the basic requirements for employment, candidates must meet the following grade-determining criteria for placement at grade levels specified. Clinical Laboratory Scientist, GS-07. (1) Experience. None beyond the basic requirements. (2) Assignment. Employees at this level serve in a CLS entry-level position. It is expected that they receive' s guidance from more experienced staff members and require direct supervision daily. Clinical Laboratory Scientist, GS-09. (1) Experience or Education. Candidates at this level must meet one of the criteria below: (a) Experience. 1 year of creditable experience equivalent to the next lower grade. OR (b) Education. Master's degree or 2 academic years of progressively higher-level graduate education in medical technology or a directly related science. (2) Knowledge, Skills, and Abilities. In addition to the experience or education above, the candidate must demonstrate the following KSAs: (a) Knowledge of policies and procedures of clinical laboratory testing. (b) Knowledge of laboratory quality control and quality assurance principles. (c) Knowledge of laboratory equipment and routine maintenance. (d) Ability to work as a team member and effectively complete assignments. (e) Ability to read and interpret written instructions. (f) Ability to accurately perform pre-analytical, analytical, and post-analytical phases of testing. (3) Assignment. An individual at this grade level serves as a developmental CLS. The CLS is responsible for evaluating, performing, interpreting, and validating the accuracy and validity of test results. The CLS demonstrates a clear progression of clinical knowledge and experience by performing testing procedures on a variety of biological specimens using manual or automated methods. This includes routine testing, quality control, routine maintenance of instrumentation and troubleshooting that applies innovative procedures and problem solving. Deviations from regular procedures, unanticipated problems, and unfamiliar situations are referred to more experienced staff for a decision or assistance. Assignments at this level will include developmental duties of increasing scope and diversity as compared to the entry level. Clinical Laboratory Scientist, GS-11. (1) Experience or Education Candidates at this level must meet one of the criteria below: (a) Experience. 1 year of creditable experience equivalent to the next lower grade level. OR (b) Education. Must have 3 full years of progressively higher-level graduate education or a Ph.D. or equivalent doctoral degree in medical technology or a directly related science. (2) Knowledge, Skills, and Abilities. In addition to the experience or education above, the candidate must demonstrate the following KSAs: (a) Knowledge of professional clinical laboratory science principles, practices, concepts, and theories that support sound, independent work. (b) Knowledge of laboratory quality control and quality assurance procedures and principles of performance improvement. (c) Skill in informatics, laboratory data flow, and laboratory processes. (d) Ability to maintain, troubleshoot, and repair instrumentation. (e) Ability to use independent technical judgment to analyze and interpret laboratory results. (f) Ability to read, interpret, and apply complex written instructions. (3) Assignment. This is considered FPL for a CLS. A CLS at this level independently carries out the day-to-day operations in the laboratory. The CLS develops, performs, evaluates, interprets, correlates, and validates the accuracy of laboratory procedures and results in line with current laboratory regulatory requirements. The work performed may be in a variety of laboratory specialties such as chemistry, microbiology, immunology, hematology, and immunohematology. Testing procedures are performed on a variety of biological specimens and/or environmental samples using manual or automated methods. In addition to routine testing, the CLS conducts quality control and routine maintenance of instrumentation and troubleshooting. The CLS correlates abnormal lab data with pathological states, determines the validity of test results, and the need for additional tests. Specific targeted laboratory responsibilities or projects may include laboratory safety officer, analyzer specialist, primary operator on new test systems, quality control specialist, supply control, and/or coordinator for the laboratory competency assessment or proficiency/survey program. This assignment may include limited duties in areas such as lab information management and ancillary testing. These tasks require a broad exercise of independent judgment and responsibility, including organizing and setting priorities with minimal technical supervision. The CLS assesses a situation, considers the options, and formulates an appropriate course of action.

How to Apply: All applicants are encouraged to apply online. To apply for this position, you must complete the full questionnaire and submit the documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (ET) on 05/07/2026 to receive consideration. To preview the questionnaire click https://apply.usastaffing.gov/ViewQuestionnaire/12947805. To begin, click Apply Online to create a USAJOBS account or log in to your existing account. Follow the prompts to select your USA JOBS resume and/or other supporting documents and complete the occupational questionnaire. Click Submit My Answers to submit your application package. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.

Application Deadline: 2026-05-07