AIRCRAFT ELECTRICIAN

AIRCRAFT ELECTRICIAN

Department: Department of the Air Force

Location(s): Elmendorf AFB, Alaska

Salary Range: $41.95 - $41.95 Per Hour

Job Summary: Opened Area(s) of Consideration: 1, 2, 3, 4 DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 - AKNG Permanent or Indefinite technicians. Area 2 - All AKNG members. Area 3 - All other current military members who are eligible to join the Alaska Air National Guard. Area 4 - All other individuals who are eligible and willing to become active military members of the Alaska Air National Guard and wear the military uniform. PDCN: D1549P01 MPCN: 3401079032 Selecting Supervisor: Dennis M. Mobley

Major Duties:

• Performs functional tests, analyzes performance and troubleshoots the electronic, electrical, hydraulic, pneumatic and mechanical functions of the subsystems integrated into the digital brake/antiskid system, maintenance annunciation panel (MAP) system of the integrated main generator, standby generator, emergency generator, flight control power, AC/DC power distribution and sub-systems integrated into the electronic/electrical and environmental systems. Interprets analog and digital operational and output characteristics and results from the Maintenance Annunciation Panel (M.A.P.), onboard computers, aircrew debriefings and specialized test equipment. The electrical system includes the electrical power generation and distribution system, the fire detection and extinguishing system, the ice and rain protection system, the landing gear system, the interior and exterior lighting system, the oxygen generation and distribution system, and the auxiliary power system. The environmental system includes compression, distribution, pressurization, heating, cooling, temperature control, moisture/air contamination control, and liquid cooling requirements. Removes, repairs, calibrates, installs, aligns, inspects, and conducts operational performance checkouts on the components of the electronic/electrical and environmental systems. Analyzes malfunctions using schematics, logic and wiring diagrams, computer data, and factory drawings. Diagnoses circuit operating characteristics using on-board computer, special test equipment and laptop computers to isolates problems to the failing component. Removes and replaces components or assemblies down to the lowest level authorized by depot. Performs organizational and intermediate level maintenance modifications as required. Performs recurring inspections and system tests of the life support and the electronic/electrical and environmental system to certify aircraft are ready for flight. Modifies and updates electrical and environmental support equipment according to applicable technical publications. Maintains and operates various types of test equipment such as oscilloscopes, diagnostic computers, digital and analog multi-meters, constant speed drive test stands, voltmeters, ammeters, etc. Performs precise and advanced wiring maintenance procedures on aircraft. Provides technical guidance, advice and/or assistance to other work centers on the interrelationship of electronic/electrical and environmental systems and their respective system, to include flight controls, offensive fire control radar, weapon release, communications, hydraulic, fuel, engine and egress. Processes and accounts for supply assets in the repairable processing system to maintain aircraft records, inspection records, and equipment maintenance in computer systems (CAMS). Documents maintenance actions and man-hour expenditures on maintenance forms and computer systems. Clears Red X symbols on maintenance forms as authorized, and performs electronic/electrical and environmental system debriefing of aircrews. Recommends methods (AFTO Form 22) to improve equipment performance and maintenance procedures, i.e., data corrections to correct software or technical order deficiencies. Processes and accounts for due-in-from maintenance (DIFM) supply assets. Documents maintenance repair actions, man-hour accounting, maintenance forms, and computer systems. Maintains historical data of repaired components, Line Replaceable Units (LRUs) and test equipment. Inspects, tests and performs operative maintenance on cryogenic and gaseous oxygen and nitrogen servicing equipment. Is able to provide a thorough inspection of the complete electronic/electrical and environmental, and other systems, of the aircraft during special and phase inspections. Provides on-the-job training to lower grade personnel concerning repair of the electronic/electrical and environmental equipment, aircraft system line replaceable units (LRUs), and aircraft electrical/environmental systems. Also provides on-the-job training (OJT) for newly assigned personnel. Prepares for and participates in various types of readiness evaluations such as Operational Readiness inspections (ORI), Inspector General (IG) inspections, Unit Effectiveness Inspections and mobility and command support exercises. May be required to perform additional duties such as aircraft crew chief, hydrazine response, aircraft or equipment decontamination, structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a member of a team to assist local authorities with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Ensures that material, equipment and components are properly stored, protected and maintained. Performs other duties as assigned.

Qualifications: GENERAL EXPERIENCE is experience or training which has provided a knowledge and skill in locating and tying in the electrical systems with the aircraft armament, electronics, and instrument systems; adjusting and calibrating the components of the various electrical systems; reading and interpreting blueprints, wiring diagrams and schematics. SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position. WG-11 - Must have at least 18 months of experience or training installing, maintaining, repairing and modifying electrical systems and major substation components of electrical system. Experience diagnosing malfunctions and determining remedy when complex relationships exists among different electrical system circuits requiring knowledge of all electrical units and systems. Experience making electrical repairs that require the use of precision measuring equipment and common hand tools. Experience in the setup and operation of computerized multiple circuit analyzing equipment in manual, semiautomatic, or automatic mode to run existing and new (not fully debugged) diagnostic programs to test and analyze aircraft electrical circuitry and interconnecting cabling of systems such as navigational computers, radar, and related equipment and to repair discrepancies. EXPERIENCE REQUIREMENTS: Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position. Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position: - Must have a comprehensive knowledge of the integration of electronically controlled electrical and environmental systems with the avionics systems of the applicable aircraft, and a general system knowledge of the hydraulic, fuel, Jet Fuel Starter (JFS), egress and engine control systems and requires the ability to use precision test equipment to accomplish this. - Must have an extensive knowledge of electrical and electronic theory, principles, formulas, advanced mathematics, fluid mechanics and dynamics. Requires the ability to apply this knowledge to the specific requirements of the integrated system on their weapon system. - Requires the skill to interpret complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the system from the schematic, following signal paths through a complex path of interconnections of components, assemblies, subassemblies, and cable harnesses. - Requires knowledge of electronics, a variety of precision test equipment, self-test procedures and technical data containing schematic diagrams, test procedures, and program information, to identify and isolate malfunctions. - Maintains the ability to diagnose and determine needed repairs for malfunctions in electrically and electronically controlled systems such as the electrical/environmental systems, and digital anti-skid system, where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate the discrepancy.

How to Apply: To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. - To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. - Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. - After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. - You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Application Deadline: 2026-04-08