Mine Safety and Health Inspector

Mine Safety and Health Inspector

Department: Department of Labor

Location(s): Peru, Illinois, Lansing, Michigan, Hibbing, Minnesota

Salary Range: $61722 - $108533 Per Year

Job Summary: This position is with Department of Labor, Mine Safety and Health Administration (MSHA), Enforcement, Duluth District. MSHA works to prevent death, illness and injury from mining; promote safe and healthful workplaces for U.S. miners. MSHA carries out the provisions of the Federal Mine Safety and Health Act of 1977 (Mine Act) as amended by the Mine Improvement and New Emergency Response (MINER) Act of 2006.

Major Duties:

• This is a career ladder progression position; the duties described below are at the GS-11 level. If selected at a grade below GS-11, the incumbent will serve in a developmental capacity, wherein the work is less complex in nature and the supervisor, or a senior level employee provides specific instruction and guidance. At the GS-11 grade level, the incumbent: Independently conducts a wide variety of onsite safety and health inspections and investigations of mining operations as applicable, mills, preparation plants and related facilities. Prepares written reports of inspections and investigations, issuing citations and orders for violations found during examinations. Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities. Provides technical advice and guidance to mine operators to help them solve problems and comply with mine safety and health requirements. Assists mine operators in the planning of modifications to improve and/or correct deficiencies in the operation such as selecting and installing new equipment and changing materials or methods. Promotes safety and health among mine operators and workers by directing and participating in safety and health training programs, meetings, demonstrations, mine rescue competitions, and related activities. Serves as a MSHA representative and information source on mine safety and health. Testifies at judicial hearings regarding notices of violations and orders of withdrawal. Work Environment: The incumbent inspects and/or investigates both surface and underground mining operations as applicable, which is a very hazardous and stressful work environment surrounded by a high risk of exposure to potentially dangerous situations. In addition to the characteristically dark, wet, and cramped environment, underground mines contain noxious gases and fumes, and the danger of potentially explosive dust or gases, electrical fires, roof falls, and exposure to radiation.

Qualifications: The Mine Safety and Health Inspection Series, GS-1822, has basic requirements for positions covered by this standard. Applicants must meet the basic requirements (IOR) to qualify. Specialized Experience is the experience that equipped the applicant with the particular knowledge, skills, and abilities (KSA's) to perform the duties of the position successfully, and that is typically in or related to the position to be filled. To be creditable, specialized experience must have been equivalent to at least the next lower grade level. To qualify for this position, your application and resume must clearly show that you possess the experience and/or education requirements as defined below. If qualifying based on experience, be sure these types of examples are evident in your resume. To qualify for the GS-09 level: Specialized Experience: One year (52 weeks) of specialized experience equivalent to at least the next lower level, GS-07, of Federal service: Mining, mine engineering, or on-site mine safety and health inspection experience performing a full range of tasks and operating a variety of equipment in underground or surface mines, or mineral processing plants. This includes practical mining experience in planning, installing, operating, monitoring, or maintaining a system or equipment for extracting the ore from the earth. Specialized experience should include extensive hands-on mining experience that provided the applicant with a comprehensive knowledge of mining methods, equipment, and occupational health and safety hazards. Specifically, applicants should have knowledge of the transportation of materials and workers, ventilation in closed spaces, ground control, roof control (for underground positions), handling and storage of hazardous materials, worksite safety practices, worksite environmental conditions that affect the health of workers, and/or accident prevention. OR Education: Two full academic years of graduate level education or master's or equivalent graduate degree in a field of study such as mining engineering, civil engineering, mechanical engineering, electrical engineering, industrial engineering, environmental engineering, industrial hygiene, occupational health and safety, geology, chemistry, or other fields of study related to mine safety and health work. OR Combination of Experience and Education: Equivalent combinations of education and experience listed above; the total percentage must equal at least 100%. To qualify for the GS-11 level: Specialized Experience: One year (52 weeks) of specialized experience equivalent to at least the next lower level, GS-09 of Federal service: Performing mine safety and health inspection, analysis and evaluation of health/safety aspects of mining industry operations and processes; or evaluation, analysis or development of agency programs. Examples of creditable experience include: Direct on-site inspection; special accident investigation; development of mine safety and health standards; data analysis and evaluation of operational mine safety and health programs; special assessments; and development of industry-wide training or safety and health awareness programs. There is no substitution of education for the required specialized experience at the GS-11 grade level. Medical Requirements Applicants and employees must be physically able to perform arduous duties efficiently and without hazard to themselves or others. Medical examination is required for all applicants for positions that involve regular or intermittent performance of inspection, investigation, rescue duties, or duties involving on-site visits. Medical conditions that constitute a hazard to safe and efficient job performance are disqualifying. The presence of medical disorders that would be aggravated by the environmental conditions of these positions and thereby hinder safe and efficient job performance are also disqualifying. Remediable defects and/or curable diseases will not permanently disqualify an applicant for appointment, but may result in the applicant's suspension from the appropriate list of eligibles pending submission of medical evidence or correction of the condition. Uncorrected distant vision must test at least 20/50 Snellen in one eye and 20/70 in the other, correctable with eyeglasses (contact lenses are not acceptable) to at least 20/30 Snellen in one eye and 20/50 in the other. Near vision must be sufficient to read without strain printed material the size of typewritten characters Normal depth perception and field of vision are required, as is the ability to distinguish basic colors. Applicants, with or without the use of a hearing aid, must have no hearing loss in either ear of more than 40 decibels in the 500, 1000, or 2000 Hz ranges.

How to Apply: Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services. To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration. Important - Save your information before the 30-minute system timeout! For help, go to the USAJOBS Help Center. STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete. NOTE: In alignment with the Presidential Memorandum titled Merit Hiring Plan, dated May 29, 2025, applicants may only submit a resume limited to two (2) pages. Only the résumé uploaded under the 'Resume" document type in USAJOBS will be reviewed. If the resume submitted exceeds two (2) pages, the application will be deemed ineligible for further consideration. STEP 2 - Complete the 1st part of the application process (USAJOBS). Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button. STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy. STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button. STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, then Update Application. To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date. For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.

Application Deadline: 2026-03-30