Department of Veterans Affairs

Dental Laboratory Technician

Marion, Illinois Full time

Dental Laboratory Technician

Department: Department of Veterans Affairs

Location(s): Marion, Illinois

Salary Range: $61111 - $79443 Per Year

Job Summary: The Marion IL Health Care System Dental Service is hiring a Dental Laboratory Technician. The incumbent performs the full range of the most complex procedures in support of dental professionals and the veteran population.

Major Duties:

  • The GS-9 dental technician functions as the senior lab technician and is fully qualified and experienced. The incumbent is considered an expert and is responsible for the daily operation and throughput of dental products within the dental laboratory. Duties include but are not limited to: Independently accomplish all aspects of fabrication for a wide range of complex dental prostheses supporting dental laboratory operations. For assignments at this level, dental laboratory technicians must have developed and demonstrated a degree of expertness in all aspects of the dental laboratory work and will be relied upon to carry out all aspects of their fabrication independently or with minimum supervision. The technician receives lab cases and prescriptions from dental staff and residents, confers with the treating doctor regarding design and fabrication, labels the cases, and determines the urgency of the work so that cases with the highest urgency are completed first, while creating a work plan to get the remaining cases done in a timely manner. The dental laboratory technician directly collaborates with Restorative Dentists, Prosthodontists, or Oral Surgeons to design and fabricate complex dental or intra-oral maxillofacial appliances. This involves (1) receiving and interpreting dental laboratory prescriptions, (2) working with these specialists in developing the design of the appliance, (3) confers with the treating specialist to determine a work flow that will ensure prioritization of cases with highest urgency, (4) personally fabricating, or overseeing the fabrication of the appliance, and (5) resolving problems in its fabrication. The technician is involved in complex removable and fixed oral-maxillofacial appliance including fixed, semi-fixed, or removable implant cases, partial and complete dentures when the severe nature of the dental abnormalities to be overcome require working to unusually close tolerances, resolving particularly difficult problems of esthetics, retention, balance, reducing tension on natural teeth and tissue, and similar problems. The technician must be skilled in prosthesis design, which may involve novel design elements to accommodate the patient's functional needs and unique anatomy. Functions include pouring primary and final impressions; fabricating custom trays; fabricating bite rims; mounting casts on articulators; setting teeth for trial dentures/partials; investing, packing, processing and finishing dentures/partials; polishing prosthesis following adjustment; fabricating night guards; fabricating provisional prostheses; repairing broken prostheses; adding teeth to prostheses; pouring and pinning final crown and bridge impressions; sectioning dies; fabricating fluoride trays; fabricating stints; fabricating transitional partials, fabricating wrought wire clasps, and fabricating fixed prostheses including metal and ceramic restorations. Fabricates complex crowns and fixed partial dentures, removable partial denture frameworks, acrylic partial and complete dentures. Provide consultation to Oral Surgeons, Prosthodontists, and other dental, and laboratory specialists in the design and fabrication of difficult intraoral maxillofacial appliances and restorations. This involves (1) working with dental specialists in developing the design of the appliance, (2) personally fabricating the appliance, and/or (3) resolving problems in its fabrication. The technician is responsible for maintaining the laboratory at the main hospital and at the Community Based Outpatient Clinics (CBOCs). These duties include, but are not limited to: ordering and maintaining laboratory supplies and equipment, researching new techniques and equipment, inventory and shipment of laboratory cases, act as facilitator between CDL North Texas, VAMC DC and dental community based clinics, maintenance of the infection control protocol within the laboratory, oversight of laboratory cleanliness and orderliness, etc. The Dental Laboratory Technician provides education, training and instruction to others in the field, other lab technicians and clinic personnel. Work Schedule: Full Time, Monday through Friday, 8:00 a.m.- 4:30 p.m. Virtual: This is not a virtual position. Position Description/PD#: Dental Laboratory Technician/PD03186A Relocation/Recruitment Incentives: Not Authorized Critical Skills Incentive (CSI): Not Approved Permanent Change of Station (PCS): Not Authorized

Qualifications: To qualify for this position, applicants must meet all requirements by the closing date of this announcement, 11/28/2025. Time-In-Grade Requirement: Applicants who are current Federal employees and have held a GS grade any time in the past 52 weeks must also meet time-in-grade requirements by the closing date of this announcement. For a GS-9 position you must have served 52 weeks at the GS-8. The grade may have been in any occupation, but must have been held in the Federal service. An SF-50 that shows your time-in-grade eligibility must be submitted with your application materials. If the most recent SF-50 has an effective date within the past year, it may not clearly demonstrate you possess one-year time-in-grade, as required by the announcement. In this instance, you must provide an additional SF-50 that clearly demonstrates one-year time-in-grade. Note: Time-In-Grade requirements also apply to former Federal employees applying for reinstatement as well as current employees applying for Veterans Employment Opportunities Act of 1998 (VEOA) appointment. Individual Occupational Requitements: Specialized Experience for positions at GS-4 and above: Examples of qualifying specialized experience include: Use of dental laboratory material such as impression materials, plasters, stones, hydrocolloids, waxes, metals, acrylics, porcelain, and similar materials. Use of laboratory equipment such as hand tools, dental lathes, engines, and hand pieces, furnaces, casting machines, presses, flasks, and related equipment. Use of precision instruments such as articulators, surveyors, and microanalyzers. Construction of dental prosthetic appliances. GS-9 You may qualify based on your experience and/or education as described below: Specialized Experience: You must have one year of specialized experience equivalent to at least the next lower grade GS-8 in the normal line of progression for the occupation in the organization. Examples of specialized experience would typically include, but are not limited to: Receives lab cases and prescriptions from dental staff, confers with the treating doctor regarding design and fabrication, labels the cases, and determines the urgency of the work so that cases with the highest urgency are completed first, while creating a work plan to get the remaining cases done in a timely manner. Collaborates with Restorative Dentists, Prosthodontists, or Oral Surgeons to design and fabricate complex dental or intra-oral maxillofacial appliances. This involves (1) receiving and interpreting dental laboratory prescriptions, (2) working with these specialists in developing the design of the appliance, (3) confers with the treating specialist to determine a work flow that will ensure prioritization of cases with highest urgency, (4) personally fabricating, or overseeing the fabrication of the appliance, and (5) resolving problems in its fabrication. Ordering and maintaining laboratory supplies and equipment, researching new techniques and equipment, inventory and shipment of laboratory cases, act as facilitator between dental service and community based clinics, maintenance of the infection control protocol within the laboratory, oversight of laboratory cleanliness and orderliness, etc. Communicates effectively with patients, patients' families, dental specialists, staff dentists, and other Dental Service staff. Contacts also include sales representatives within the healthcare industry involved in providing supplies and dental instrumentation and equipment. Contact with other employees in the hospital includes nurses on the patient wards, clerical staff, and administrative staff. OR, Education: To qualify based on education for this grade level you must have two full years of graduate education or a master's degree in a degree relevant to the position. You will be rated on the following Competencies for this position: Communications Production and Processing Technical Competence Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Note: A full year of work is considered to be 35-40 hours of work per week. Part-time experience will be credited on the basis of time actually spent in appropriate activities. Applicants wishing to receive credit for such experience must indicate clearly the nature of their duties and responsibilities in each position and the number of hours a week spent in such employment. Physical Requirements: Long periods of standing, sitting and bending are required. The work requires above average agility and dexterity. Work Environment: Work involves regular and recurring exposure to potential hazards of plaster dust, fire (open flame), chemical exposure (methylmethacrylates, alcohol, polymers, sterilizing agent) and communicable diseases (exposure to blook, saliva, tissue, bone). The lab technician wears face masks, protective glasses, and uses special aseptic techniques when handling impressions or other items that are potential infection hazard. They work in a clinic setting with some exposure to patients in dental treatments rooms. For more information on these qualification standards, please visit the United States Office of Personnel Management's website at https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/.

How to Apply: All applicants are encouraged to apply online. To apply for this position, you must complete the questionnaire and submit the documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (ET) on 11/28/2025 to receive consideration. To preview the questionnaire click https://apply.usastaffing.gov/ViewQuestionnaire/12839957. To begin, click Apply Online to create a USA JOBS account or log in to your existing account. Follow the prompts to select your USA JOBS resume and/or other supporting documents and complete the occupational questionnaire. Click Submit My Answers to submit your application package. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date. Beginning September 27, 2025, Federal agencies will only accept resumes up to two pages in length to comply with the Merit Hiring Plan. Resumes longer than two pages will result in ineligibility for further consideration for the position. USAJOBS will not allow you to upload or build resumes longer than two pages, and you will need to update the resumes in your profile before applying for a job. Resumes should include information relevant to the knowledge, skills, abilities, and competencies of the position to which you are applying. VA is unable to make assumptions about qualifications if not clearly listed. Resumes must be legible so they can be reviewed for eligibility, minimum qualifications and other position requirements listed in the job announcement. If initial application submission is updated and resubmitted with a new resume, only the most current resume will be reviewed for consideration. Your resume must be 5MB or less. We recommend saving and uploading your resume as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. We recommend using a sans-serif font size like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans. Make your page margins 0.5 inches. Consider using 14-point size font for titles and 10-point for the main text in your resume. The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started. Helpful Hints for Creating a Two-Page Resume: Prioritize most relevant and recent experience Use concise, results focused language Align language from the job announcement Focus on demonstrating skills and competencies Remove outdated or unrelated experience Use the USAJOBS resume builder Additional guidance on this new requirement and resume building tools can be found at: https://help.usajobs.gov/faq/application/documents/resume/page-limit https://www.opm.gov/policy-data-oversight/hiring-information/merit-hiring-plan-resources/applicant-guidance-on-the-two-page-resume-limit/ Special Employment Consideration: VA encourages persons with disabilities to apply, including those eligible for hiring under 5 CFR 213.3102(u), Schedule A, Appointment of persons with disabilities [i.e., intellectual disabilities, severe physical disabilities, or psychiatric disabilities], and/or Disabled veterans with a compensable service-connected disability of 30% or more. Contact the Agency Contact for information on how to apply under this appointment authority via the Selective Placement Coordinator. The Interagency Career Transition Assistance Plan (ICTAP) and Career Transition Assistance Plan (CTAP) provide eligible displaced Federal/VA competitive service employees with selection priority over other candidates for competitive service vacancies. To be qualified you must submit appropriate documentation (a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting current position, grade level, and duty location) and be found well-qualified for this vacancy. To be well-qualified: applicants must possess experience that exceeds the minimum qualifications of the position including all selective factors, and who are proficient in most of the required competencies of the job. Information about ICTAP and CTAP eligibility is on OPM's Career Transition Resources website at http://www.opm.gov/policy-data-oversight/workforce-restructuring/employee-guide-to-career-transition/. During the application process you may have an option to opt-in to make your resume available to hiring managers in the agency who have similar positions. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Application Deadline: 2025-11-28