Biomedical Equipment Support Specialist

Biomedical Equipment Support Specialist

Department: Department of Veterans Affairs

Location(s): Philadelphia, Pennsylvania

Salary Range: $47494 - $113194 Per Year

Job Summary: This position is located at the Corporal Michael J. Crescenz VA Medical Center, Philadelphia. The Biomedical Equipment Support Specialist (BESS) provides clinical and administrative support to staff, patients, and administrators for all matters of concern relating to the facility wide lifecycle management of medical equipment. Biomedical support requires the application of engineering and mechanical concepts.

Major Duties:

• BESS assist in lifecycle management of any and all medical systems such as imaging, lab analyzers, life support, dialysis, and monitoring to include physical and network support. Completes both routine and moderately complex assignments involved in the installation, maintenance, modification, troubleshooting, repair and calibration of these therapeutic, diagnostic, and life support medical devices and systems of differing complexities. Coordinates and works effectively with other facility support departments including but not limited to Facilities Management Service (FMS), Office of Information Technology (OIT), Sterile Processing Service (SPS), and Environmental Management Service (EMS). Specific tasks include but are not limited to incoming inspections, regular and unscheduled maintenance, and planning for end of life replacement in conjunction with clinical services. Utilizes common test equipment including, but not limited to, electrical safety analyzers, oscilloscopes, patient simulators, pulse generators, network analyzers, and multimeters. Performs testing and troubleshooting of medical devices and systems involving their interfaces and connections to information systems either directly or through the facility's hardwired and wireless networks. Learns and adheres to Medical Device Isolation Architecture (MDIA) Guidelines in both pre-procurement and during system implementation. May load operating system (OS) and clinical application software as needed under guidance of more experienced BESS. Executes VA guidelines when assisting in responding to network incidents (due to infection, loss of services or regional and local policy changes). Maintains functional knowledge of relevant safety codes and standards of regulatory bodies including but not limited to The Joint Commission (TJC), National Fire Protection Association (NFPA), Food and Drug Administration (FDA), Nuclear Regulatory Commission (NRC), Association for the Advancement of Medical Instrumentation (AAMI). Documents all work performed in the computerized maintenance management system (CMMS). This documentation is completed in accordance with regulatory body requirements, Healthcare Technology Management (HTM) Documentation of Services guidelines and other organizational requirements. As assigned, may work closely with designated Contracting Officer Representative (COR) to gain knowledge of government contract procedures and documentation requirements such as development of statements of work, sole source justifications, other applicable documentation (6550, Independent Government Cost Estimate (IGCE), etc.) and overseeing vendor work. Investigates, remediates and documents recalls and safety alerts within established timeframes. Identifies hazards during routine job performance and takes action to ensure they are addressed and corrected. Develops and maintains knowledge of the state of the art in medical technology, including scientific advances, basic network protocols and medical device security, and vendor changes. Focuses on professional development in all areas of medical technology lifecycle management including technical skills. Knowledge and training is obtained from formal (conference, classes) or informal (magazines, articles, peer training) means. As this is a developmental level 2 position, the employee will spend time working with more experienced BESS and/or Biomedical Engineer to learn and develop technical and administrative skills. Provides training and education as appropriate to medical technology end users and clinical staff. Provides mentoring and technical training to peers and lower graded development BESS. May assist with management of installation or upgrade projects for medical devices and systems. This includes but is not limited to pre-implementation planning and coordination with end users, vendors, and other onsite support staff (OIT, Informatics, SPS, etc.) Additional duties are performed as assigned by supervisor related to maintenance, remediation, and tracking of medical systems (action items, special projects, etc.) to meet mission critical requirements. May be asked to assist in other administrative duties as well. Serves as an advocate for Biomedical/Clinical Engineering department in all interactions with others. Work Schedule: Monday -Friday 7:00 am - 3:30 pm Physical Requirements: The work required does not inherently include any physical requirements essential for successful job performance that could not otherwise be performed with accommodation or workplace adjustment. Heavy lifting (45 lbs and over)

Qualifications: Basic Requirements: United States Citizenship: Non-citizens may only be appointed when it is not possible to recruit qualified citizens in accordance with VA Policy. Education, Experience, or Certification. (1) Associates or higher degree in the biomedical technology or biomedical engineering field; OR (2) Associates or higher degree in electronics, a field of information technology, or engineering (other than biomedical engineering) AND 1 year of creditable experience; OR (3) Completion of the Department of Defense (DOD) biomedical equipment technician training program; OR (4) Completion of a DOD training program in repair and maintenance of electronic systems or information technology AND 1 year of creditable experience; OR (5) Completion of a biomedical engineering technician or Healthcare Technology Management (HTM) certificate program that included an internship or apprenticeship; OR (6) Completion of biomedical engineering technician or HTM certificate program that did not include an internship AND 1 year of creditable experience; OR (7) Hold or having ever held certification as a Certified Biomedical Equipment Technician (CBET), Certified Radiology Equipment Specialist (CRES), Certified Laboratory Equipment Specialist (CLES), or Certified Healthcare Technology Manager (CHTM). Continuous maintenance of certification is not required throughout VHA employment. Grade Determinations: In addition to the basic requirements for employment, the following criteria must be met when determining the grade of candidates: References: VA Handbook 5005 Appendix G49 Biomedical Equipment Support Specialist QUALIFICATION STANDARD , dated February 7, 2022 The full performance level of this vacancy is GS-11. The actual grade at which an applicant may be selected for this vacancy is in the range of GS-5 to GS-11. Biomedical Equipment Support Specialist, GS-5 (Entry Level) (1) Experience or Education. None beyond the basic requirements. (2) Assignment. Employees at this grade level serve as entry-level developmental BESSs. It is expected that they receive guidance from more experienced staff members and require regular supervision. BESSs at this grade level perform basic tasks designed to prepare them for promotion. They troubleshoot and perform planned maintenance on general medical equipment. Entry-level BESSs assist with incoming inspections and documentation. Biomedical Equipment Support Specialist, GS-7 (Developmental Level 1) Experience. At least 1 year of experience comparable to the next lower grade level (GS-5) which demonstrates the knowledge, skills, abilities(KSAs), and other characteristics related to the duties of the position to be filled such as providing support of basic medical equipment and systems. In addition, you must demonstrate the following KSAs: (a) Knowledge of physics, anatomy, and physiology. (b) Knowledge of electronics such as analog, digital, and microprocessor theory. (c) Knowledge of the use of standard level test equipment such as multi- meters, electrical safety analyzers, patient simulators, storage oscilloscopes, manometers, and tachometers. (d) Knowledge of basic networking concepts, such as computer and server hardware and software functionality, information technologies and computer virus protection software, available software patches and upgrades, and information security tools (for example, Microsoft Office, Windows operating systems, and McAfee). (e) Skill in documenting all services provided in support of medical equipment and clinical systems in a computerized maintenance management system. (f) Ability to learn equipment operating and maintenance procedures. Biomedical Equipment Support Specialist, GS-9 (Developmental Level 2) Experience. At least 1 year of experience comparable to the next lower grade level (GS-7) which demonstrates the KSAs, and other characteristics related to the duties of the positions to be filled such as providing support of medical equipment and systems; performing and documenting all repairs and preventive maintenance activities; performing incoming inspections on new medical equipment and systems; and providing biomedical equipment technical training. In addition, you must demonstrate the following KSAs: (a) Knowledge of basic networking concepts including Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN). (b) Knowledge of computer and server hardware and software functionality including virus protection, operating system patches and upgrades, and information security tools. (c) Ability to interpret a variety of technical data such as schematic drawings, wiring diagrams, table charts, mathematical expressions, and formulas. (d) Ability to use standard level test equipment including multi-meters, electrical safety analyzers, patient simulators, storage oscilloscopes, manometers, and tachometers. Biomedical Equipment Support Specialist, GS-11 (Full Performance Level) Experience. At least one year of experience equivalent to the GS-9 grade level providing support of medical equipment and systems; utilizing schematic drawings, wiring diagrams, and technical manuals as guidelines; maintaining inventory documentation of assigned networked-attached medical equipment/systems; and providing biomedical equipment technical training. Certification as a Certified Biomedical Equipment Technician (CBET), Certified Laboratory Equipment Specialist (CLES), Net+ and A+ are highly desirable at this level but not required. In addition to the experience above, you must demonstrate all of the following KSAs: a) Knowledge of standards including National Fire Protection Association (NFPA), Food and Drug Administration (FDA), the Joint Commission (TJC), and the Association for the Advancement of Medical Instrumentation (AAMI) for safe operation of medical equipment and clinical systems. (b) Skill in using test and calibration equipment including digital multi- meters, electrical safety analyzers, defibrillator analyzers, patient simulators, manometers, tachometers, and Local Area Network (LAN) analyzers. (c) Skill in interpreting a variety of technical data including schematic drawings and wiring diagrams. (d) Skill in applying networking principles, such as Access Control List (ACL), Transmission Control Protocol/Internet Protocol (TCP/IP), and Virtual Local Area Networks (VLAN). (e) Ability to perform advanced testing to troubleshoot medical equipment and clinical system interfaces. (f) Ability to maintain medical computers and software. (g) Ability to manage projects involving medical equipment and clinical systems.

How to Apply: Please read the entire announcement and all the instructions before you begin an application. To apply for this position, you must complete the initial online application, to include the initial online questionnaire and submission of the required documentation specified in the How to Apply and Required Documents section. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. To preview the application questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12939994. The application process is as follows: To begin, click Apply Online to create a USA JOBS account or log in to your existing account. Follow the prompts to select your USA JOBS resume and/or other supporting documents. Answer the questions presented in the application and attach all necessary supporting documentation. Click the Submit Application button prior to 11:59 PM (ET) on the announcement closing date, 05/01/2026. If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. Set aside at least 3 hours to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. NOTE: Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. Visit the USA Hire Applicant Resource Center for practice assessments and assessment preparation resources at https://support-usahire.opm.gov/hc/en-us. To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: https://help.usajobs.gov/how-to. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date.

Application Deadline: 2026-05-01