AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC (Title 32)

AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC (Title 32)

Department: Department of the Air Force

Location(s): Peoria, Illinois

Salary Range: $31.5 - $36.74 Per Hour

Job Summary: THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC (Title 32), Position Description Number D0097000 and is part of the IL 182 AW, National Guard.

Major Duties:

• As an AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC (Title 32), WG-8268-10, you will serve within a fuel systems shop responsible for the inspection, repair, and maintenance of aircraft fuel cells, water injection, antidetonant (ADI), and inflight refueling systems. You will utilize extensive knowledge of fuel systems maintenance practices and procedures to troubleshoot fuel system malfunctions, determine the extent and type of preventive and/or repair maintenance required, and perform all necessary repairs, installations, and operational checks. Major Duties - This is NOT an all-inclusive list: Perform organizational and intermediate maintenance on aircraft fuel systems, components, and equipment such as fuel cells, drop tanks, pumps, regulators, relief valves, and related accessories. Perform installation, repair, and operational checks on inflight refueling systems, single-point refueling systems, and fuel transfer components. Repair, reassemble, and install fuel system components and verify proper operation using bench test equipment and related test devices. Perform maintenance activities required by Time Compliance Technical Orders (TCTOs) for aircraft fuel systems and inflight refueling systems. Perform tasks related to additional support functions such as structural firefighting, munitions handling, heavy equipment operation, or facility maintenance when required. Perform visual and dye-trace leak checks to identify fuel system leaks and determine the condition of fuel cell sealant. Determine feasibility of repairing or replacing faulty fuel components and determine when unsatisfactory equipment reports are required. Perform precise disassembly, cleaning, examination, and overhaul of fuel accessories to identify corrosion, scratches, cracks, or damage. Replace gaskets, seals, and worn parts to restore functionality of pneudraulic fuel system accessories in accordance with technical standards. Adjust fuel accessories following reassembly to ensure proper operation and compliance with technical data requirements. Connect power sources and use cockpit gauges, controls, and precision test instruments to perform functional checks of refueling and fuel transfer systems. Use test equipment such as pressure testers, flow meters, leak detectors, or bench-test rigs to confirm serviceability of fuel system components. Use additional diagnostic instrumentation to verify operational status of pumps, valves, switches, selectors, and control devices. Use calibrated measuring devices to examine component wear, alignment, and operational tolerances during inspection and overhaul procedures. Utilize electrical wiring diagrams, blueprints, schematics, and technical publications to determine the extent and type of maintenance required. Interpret TCTOs, functional check procedures, and compliance requirements to perform applicable fuel system maintenance actions. Use technical data, maintenance manuals, system schematics, and illustrated parts breakdowns to support troubleshooting and component overhaul. Interpret instructions and safety standards governing entry into fuel cell repair areas and fuel systems maintenance procedures. Use hand tools, power tools, torque tools, and specialized equipment to perform maintenance on pneudraulic and fuel system components. Maintain test benches, leak-check equipment, and diagnostic instruments required for repair and overhaul operations. Use safety equipment, protective gear, and repair-area control procedures when performing fuel cell entry or hazardous maintenance. Maintain tools and equipment in serviceable condition and ensure proper calibration and handling when performing precise repairs. Troubleshoot fuel system malfunctions using wiring diagrams, schematics, cockpit controls, gauges, and diagnostic instruments. Determine the cause of faulty fuel system operation, identify defective components, and decide whether repair or replacement is appropriate. Diagnose issues within inflight refueling, single-point refueling, and fuel transfer systems and identify required corrective actions. Diagnose malfunctions in fuel accessories by disassembling, cleaning, and examining parts to identify defects such as corrosion or cracks. Determine corrective measures to restore system operation and ensure compliance with technical standards and inspection criteria.

Qualifications: AREA OF CONSIDERATION: The areas of consideration for this position, Title 32 Excepted Service (32 U.S. Code § 709), will be in the following manner and sequence: The FIRST area of consideration for this position will be all excepted permanent and indefinite temporary technicians within the ILNG. The SECOND area of consideration will be all current Federal Employees. The THIRD area of consideration will be all Federal re-employment eligible. The FOURTH area of consideration will be applicants willing to become T32 Dual Status Technicians and gain ILNG membership. The FIFTH area of consideration will be U.S. Citizens. Military Grades: Enlisted Only - Minimum rank of A1C & May not exceed the rank of TSgt. GENERAL EXPERIENCE: MUST possess experience or training which demonstrates your knowledge of basic electrical and mechanical principles; knowledge of troubleshooting procedures used to isolate malfunctions in aircraft pneudraulic systems; and ability to use technical manuals, equipment specifications, and test calibration procedures in performing the work. SPECIALIZED EXPERIENCE: WG-10 Level - MUST possess specialized experience which includes experience or training which provided a knowledge of basic electrical and mechanical principles. Experience in fabricating fuel, oil, and vacuum hose lines. Experience in servicing, maintaining, disassembling assembling, repairing and testing hydraulic and pneumatic systems. Experience in diagnosing malfunctions and overhauling pneudraulic accessories by disassembling, cleaning part and examining parts. Experience in diagnosing trouble and determining remedies. Experience in repairing, rebuilding, and overhauling major systems of ground equipment and pneumatic and hydraulic systems. Experience in mechanical repairs using hand tools and test equipment. Experience that demonstrates the ability to interpret technical manuals, specifications, and publications. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

How to Apply: To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12810053 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Application Deadline: 2026-11-23